The Atlas range of commercial stainless steel extractor hoods makes building your commercial cookline more affordable. These canopies are fully welded and come complete with stainless steel baffle filters.

The range has 3 x Base lengths of 1250 mm, 1500 mm, & 2000 mm LG. A combination of these lengths can be used to make up larger sizes. (SEE OPTIONS)

Current guidelines specify that there must be an overhang of at least 250mm on the front and ends of your extractor hood. For example, if you have a cooker that is 800mm deep, then your hood must be at least 1050 mm deep.

If you select the option for stainless steel wall cladding you will be provided with sufficient cladding for the entire length and both sides of your canopy chosen. This will also include Joining strips, corner joints, and end cappings.

• Commercial extractor hoods have a large fume containment area.
• Please note that this extractor hood does not include a fan or ductwork.
• The wall behind the canopy must be fitted with a heat resistant no porous surface like tiles or stainless steel wall cladding
• All stainless steel construction and fully assembled
• These canopies are quite simple to install, and we can supply you with expert advice on the installation of this product.
• Baffle filters are included as standard, additional filters can also be purchased
• Overall Dimensions 1100 mm Deep x 500 mm High

The Stainless steel canopy is available in different sizes to choose from

View Atlas Canopies Spec Sheet